Description

Lost Vape Thelema Quest 200W Vape Mod

The Lost Vape Thelema Quest 200W Vape Mod is a standalone dual-battery box mod powered by Lost Vape’s Quest 2.0 chipset. Designed for use with compatible 510-threaded tanks and atomisers, the device offers a maximum output of 200W and a wide range of operating modes.

Unlike the Thelema Quest 200W Kit, this listing is for the mod only. No tank, pod tank or coils are included. The device requires two 18650 batteries, which are also sold separately. Lost Vape specifies a 5–200W power range, a 0.7–8.0V output range and support for resistances above 0.1Ω up to 5.0Ω.

Lost Vape Thelema Quest 200W Vape Mod Features

• Lost Vape Thelema Quest 200W Vape Mod
• Quest 2.0 Chipset
• 5–200W Output Range
• Dual 18650 Battery Configuration
• Batteries Sold Separately
• 0.7–8.0V Output Voltage
• 0.1–5.0Ω Resistance Range
• 0.96-inch TFT Colour Display
• 80 × 160 Screen Resolution
• VPC Mode
• Bypass Mode
• Wattage Mode
• Voltage Mode
• Temperature Control
• Soft, Normal & Hard Firing Modes
• Three User Memory Records
• USB Type-C Charging
• 510 Threaded Connection
• Multiple Safety Protections
• C-Frame Battery Door

Thelema Quest 200W Vape Mod Performance

The Lost Vape Thelema Quest 200W Vape Mod provides an adjustable output range from 5W to 200W. This broad power range allows the device to be configured according to the specifications of a compatible tank or atomiser.

The mod is powered by two external 18650 lithium-ion batteries. The batteries are not included and must be purchased separately.

The dual-battery configuration provides the power source required for the mod’s high maximum output. Users should always use appropriate, correctly rated batteries and follow the manufacturer’s battery installation instructions.

Quest 2.0 Chipset

At the centre of the Thelema Quest 200W Vape Mod is Lost Vape’s Quest 2.0 chipset.

The chipset provides access to five primary vaping modes:

• VPC
• Bypass
• Wattage
• Voltage
• Temperature Control

Temperature-control operation supports compatible materials including SS904, SS316, titanium and nickel.

The device also provides three firing modes:

• Soft
• Normal
• Hard

These settings alter the firing characteristics of the mod according to the selected configuration.

Lost Vape Thelema Quest 200W Vape Mod Dual 18650 Battery

The Thelema Quest 200W Vape Mod requires two 18650 lithium-ion batteries.

The batteries are not included with the standalone mod.

The battery compartment uses Lost Vape’s C-frame design with a removable battery spine. The magnetic system allows the battery door to be removed when accessing the battery compartment and then secured back into position.

Always install batteries according to the polarity markings inside the device.

Only use suitable, correctly rated batteries and inspect batteries before installation. Damaged battery wraps should not be used.

Thelema Quest 200W Vape Mod Display

The device features a 0.96-inch TFT colour display with an 80 × 160 pixel resolution.

The screen provides information about the mod’s current settings and operating status.

Users can view their selected power settings and other relevant operating information through the display. The device also provides screen and colour customisation options through its menu system.

Lost Vape Thelema Quest 200W Vape Mod User Memory

The Quest 2.0 chipset includes three user records, allowing users to save different configurations.

These memory slots can be used to store different operating settings, making it possible to switch between previously configured setups without manually entering every setting again.

VPC Mode

The Thelema Quest 200W Vape Mod includes VPC, or Variable Power Curve, mode.

This mode allows the power output to be configured across different stages of the firing cycle.

VPC provides additional control over the way power is delivered compared with a standard fixed wattage setting.

Bypass Mode

Bypass mode provides an alternative operating configuration where the mod’s output is based more directly on the available battery voltage.

The available output will therefore depend on the battery voltage and the connected atomiser resistance.

Always ensure that the connected atomiser and coil are suitable for the selected mode.

Wattage Mode

Wattage mode allows the output power to be adjusted between 5W and 200W, subject to the device’s resistance and battery limitations.

This is the standard variable-wattage operating mode and allows the power setting to be matched to the requirements of a compatible coil.

Always follow the recommended wattage range printed on the coil or supplied by the coil manufacturer.

Voltage Mode

Voltage mode allows the output voltage to be adjusted within the device’s supported range.

The Thelema Quest supports an output voltage range of approximately 0.7–8.0V.

Temperature Control

The Quest 2.0 chipset also provides temperature-control functionality.

Supported materials include:

• SS904
• SS316
• Titanium
• Nickel

Temperature control should only be used with coils specifically designed for the selected material.

Soft, Normal & Hard Firing

The Thelema Quest 200W Vape Mod features three firing options:

Soft: Provides an output below the standard setting.

Normal: Provides the standard output specified by the selected vaping mode.

Hard: Provides a higher initial output compared with the standard setting.

These options allow the firing behaviour of the device to be adjusted.

USB-C Charging

The Lost Vape Thelema Quest 200W Vape Mod features a USB Type-C charging port.

Lost Vape specifies DC 5V Type-C fast charging for the device.

The USB-C port provides a convenient way to recharge compatible batteries while they remain installed in the mod.

However, because the Thelema Quest uses removable 18650 batteries, an appropriate external battery charger can also be used where suitable.

510 Connection

The Thelema Quest features a standard 510 threaded connection.

This allows the standalone mod to be used with compatible 510-threaded tanks and atomisers.

The 510 connection makes the device suitable as a standalone box mod rather than restricting it to the tank supplied with the original kit.

When selecting a tank or atomiser, ensure that its resistance and power requirements are compatible with the Thelema Quest’s specifications.

Lost Vape Thelema Quest 200W Vape Mod Design

The Thelema Quest 200W Vape Mod uses a zinc-alloy and PC construction, with different versions featuring clear, carbon-fibre or calf-leather battery-door finishes.

The device has a C-frame design with a removable magnetic battery spine.

The approximate dimensions are:

56.1 × 27.6 × 92.5mm

The exact weight can vary according to the battery-door finish.

Lost Vape Thelema Quest 200W Vape Mod Safety Features

The Quest 2.0 chipset includes multiple protection systems.

Listed protections include:

• Short-circuit protection
• Weak-battery protection
• Low-battery protection
• Check-atomiser protection
• Overheat/temperature protection
• 10-second overtime protection

These systems are designed to monitor the device during normal operation.

The mod should always be operated according to the manufacturer’s instructions.

The specifications above are for the standalone Thelema Quest 200W Box Mod, not the complete kit.

Lost Vape Thelema Quest 200W Vape Mod Colours

The standalone mod has been produced in a number of finishes. Lost Vape and current product listings identify the following colour options:

• Black Clear
• Gunmetal Clear
• SS Clear
• Black Carbon Fiber
• Gunmetal Carbon Fiber
• SS Carbon Fiber
• Matte Blue Carbon Fiber
• Matte Red Carbon Fiber
• Black Calf Leather
• Gunmetal Calf Leather
• SS Calf Leather

Additional colour variants, including Green Clear, Purple Clear, Green Carbon Fiber and Purple Carbon Fiber, also appear in some current listings. Availability varies by supplier and market.

For your WooCommerce variations, I recommend using only the exact colours you physically have in stock.

What’s Included

Because this is the Thelema Quest 200W Vape Mod only, the contents are:

• 1 × Lost Vape Thelema Quest 200W Vape Mod
• 1 × USB Type-C Charging Cable
• 1 × User Manual
• 1 × Warranty Card

18650 batteries are not included.

Tank, pod tank and coils are not included.

Important Product Information

The Lost Vape Thelema Quest 200W Vape Mod is a standalone box mod and does not include the UB Pro Pod Tank supplied with the corresponding Thelema Quest kit.

Two suitable 18650 batteries are required before the device can be operated.

Always ensure that batteries are installed correctly according to the polarity markings and that any connected tank or atomiser is compatible with the device.

Check the manufacturer’s instructions for complete operating, charging and safety information.